Amico Mira LED - Manual (Page 16)

16 Amico Lighting Solutions
Installation: Mira LED Floorstand
• Remove M3 Allen screws on the sides and remove
the power supply case.
• Loosen the 2 M6 Allen screws on the lower stand
tube.
• Thread the stand tube cable through the wheeled
stand.
• Attach the lower stand tube to the wheeled stand
using the 2 M6 Allen screws.
• Push together the cable of the lower stand tube
and the power supply until a click is heard.
• Tighten the screws of the power supply case with
M3 Allen screw and lock washers.
• Push together the cables oft he upper and lower
stand tube until a click is heard.
• Mount the upper stand tube on to the lower
stand.
• Screw the cable holder on to the lower stand tube
using M4 Allen screw.
CAUTION
Never unscrew the upper cable holder – danger of
injury.
• When both cable holders are removed, the
connector is then free and can fall causing
possible injury and/or damage to the cable and
equipment.
INSTALLING triango 30 F ENG
15
7 INSTALLING triango 30 F
 Remove M3 Allen screws on the sides and
remove the power supply case.
 Loosen the 2 M6 Allen screws on the lower
stand tube.
 Thread the stand tube cable through the
wheeled stand.
 Attach the lower stand tube to the wheeled
stand using the 2 M6 Allen screws.
 Push together the cable of the lower stand
tube and the power supply until a click is
heard.
 Tighten the screws of the power supply case
with M3 Allen screw and lock washers.
 Push together the cables oft he upper and
lower stand tube until a click is heard.
 Mount the upper stand tube on to the lower
stand.
 Screw the cable holder on to the lower stand
tube using M4 Allen screw.
CAUTION
Never unscrew the upper cable holder –
danger of injury.
 When both cable holders are removed, the
connector is then free and can fall causing
possible injury and/or damage to the cable
and equipment.
 Take M8 Allen screw from the upper stand
tube.
 Remove covering cap with plug.
 Insert spring-balanced arm and secure with
M8 Allen screw.
INSTALLING triango 30 F ENG
15
7 INSTALLING triango 30 F
 Remove M3 Allen screws on the sides and
remove the power supply case.
 Loosen the 2 M6 Allen screws on the lower
stand tube.
 Thread the stand tube cable through the
wheeled stand.
 Attach the lower stand tube to the wheeled
stand using the 2 M6 Allen screws.
 Push together the cable of the lower stand
tube and the power supply until a click is
heard.
 Tighten the screws of the power supply case
with M3 Allen screw and lock washers.
 Push together the cables oft he upper and
lower stand tube until a click is heard.
 Mount the upper stand tube on to the lower
stand.
 Screw the cable holder on to the lower stand
tube using M4 Allen screw.
CAUTION
Never unscrew the upper cable holder –
danger of injury.
 When both cable holders are removed, the
connector is then free and can fall causing
possible injury and/or damage to the cable
and equipment.
 Take M8 Allen screw from the upper stand
tube.
 Remove covering cap with plug.
 Insert spring-balanced arm and secure with
M8 Allen screw.
INSTALLING triango 30 F ENG
15
7 INSTALLING triango 30 F
 Remove M3 Allen screws on the sides and
remove the power supply case.
 Loosen the 2 M6 Allen screws on the lower
stand tube.
 Thread the stand tube cable through the
wheeled stand.
 Attach the lower stand tube to the wheeled
stand using the 2 M6 Allen screws.
 Push together the cable of the lower stand
tube and the power supply until a click is
heard.
 Tighten the screws of the power supply case
with M3 Allen screw and lock washers.
 Push together the cables oft he upper and
lower stand tube until a click is heard.
 Mount the upper stand tube on to the lower
stand.
 Screw the cable holder on to the lower stand
tube using M4 Allen screw.
CAUTION
Never unscrew the upper cable holder –
danger of injury.
 When both cable holders are removed, the
connector is then free and can fall causing
possible injury and/or damage to the cable
and equipment.
 Take M8 Allen screw from the upper stand
tube.
 Remove covering cap with plug.
 Insert spring-balanced arm and secure with
M8 Allen screw.
INSTALLING triango 30 F ENG
15
7 INSTALLING triango 30 F
 Remove M3 Allen screws on the sides and
remove the power supply case.
 Loosen the 2 M6 Allen screws on the lower
stand tube.
 Thread the stand tube cable through the
wheeled stand.
 Attach the lower stand tube to the wheeled
stand using the 2 M6 Allen screws.
 Push together the cable of the lower stand
tube and the power supply until a click is
heard.
 Tighten the screws of the power supply case
with M3 Allen screw and lock washers.
 Push together the cables oft he upper and
lower stand tube until a click is heard.
 Mount the upper stand tube on to the lower
stand.
 Screw the cable holder on to the lower stand
tube using M4 Allen screw.
CAUTION
Never unscrew the upper cable holder –
danger of injury.
 When both cable holders are removed, the
connector is then free and can fall causing
possible injury and/or damage to the cable
and equipment.
 Take M8 Allen screw from the upper stand
tube.
 Remove covering cap with plug.
 Insert spring-balanced arm and secure with
M8 Allen screw.
INSTALLING triango 30 F ENG
15
7 INSTALLING triango 30 F
 Remove M3 Allen screws on the sides and
remove the power supply case.
 Loosen the 2 M6 Allen screws on the lower
stand tube.
 Thread the stand tube cable through the
wheeled stand.
 Attach the lower stand tube to the wheeled
stand using the 2 M6 Allen screws.
 Push together the cable of the lower stand
tube and the power supply until a click is
heard.
 Tighten the screws of the power supply case
with M3 Allen screw and lock washers.
 Push together the cables oft he upper and
lower stand tube until a click is heard.
 Mount the upper stand tube on to the lower
stand.
 Screw the cable holder on to the lower stand
tube using M4 Allen screw.
CAUTION
Never unscrew the upper cable holder –
danger of injury.
 When both cable holders are removed, the
connector is then free and can fall causing
possible injury and/or damage to the cable
and equipment.
 Take M8 Allen screw from the upper stand
tube.
 Remove covering cap with plug.
 Insert spring-balanced arm and secure with
M8 Allen screw.
INSTALLING triango 30 F ENG
15
7 INSTALLING triango 30 F
 Remove M3 Allen screws on the sides and
remove the power supply case.
 Loosen the 2 M6 Allen screws on the lower
stand tube.
 Thread the stand tube cable through the
wheeled stand.
 Attach the lower stand tube to the wheeled
stand using the 2 M6 Allen screws.
 Push together the cable of the lower stand
tube and the power supply until a click is
heard.
 Tighten the screws of the power supply case
with M3 Allen screw and lock washers.
 Push together the cables oft he upper and
lower stand tube until a click is heard.
 Mount the upper stand tube on to the lower
stand.
 Screw the cable holder on to the lower stand
tube using M4 Allen screw.
CAUTION
Never unscrew the upper cable holder –
danger of injury.
 When both cable holders are removed, the
connector is then free and can fall causing
possible injury and/or damage to the cable
and equipment.
 Take M8 Allen screw from the upper stand
tube.
 Remove covering cap with plug.
 Insert spring-balanced arm and secure with
M8 Allen screw.
INSTALLING triango 30 F ENG
15
7 INSTALLING triango 30 F
 Remove M3 Allen screws on the sides and
remove the power supply case.
 Loosen the 2 M6 Allen screws on the lower
stand tube.
 Thread the stand tube cable through the
wheeled stand.
 Attach the lower stand tube to the wheeled
stand using the 2 M6 Allen screws.
 Push together the cable of the lower stand
tube and the power supply until a click is
heard.
 Tighten the screws of the power supply case
with M3 Allen screw and lock washers.
 Push together the cables oft he upper and
lower stand tube until a click is heard.
 Mount the upper stand tube on to the lower
stand.
 Screw the cable holder on to the lower stand
tube using M4 Allen screw.
CAUTION
Never unscrew the upper cable holder –
danger of injury.
 When both cable holders are removed, the
connector is then free and can fall causing
possible injury and/or damage to the cable
and equipment.
 Take M8 Allen screw from the upper stand
tube.
 Remove covering cap with plug.
 Insert spring-balanced arm and secure with
M8 Allen screw.