Canon BJC-620 - Manual (Page 86)

3DFNDUG %HOO &'7:
•
Press Fl to Enter Setup
•
Arrow to Integrated Peripherals
•
Change PARALLEL PORT MODE to AUTO
•
Press Escape Twice
•
Save and Exit
3DFNDUG %HOO ([FHO 3OXV
•
Press CTRL ALT S to Enter Setup
•
Select ADVANCED SYSTEM Setup
•
Hardware Configuration
•
Change Parallel Port Mode to "OUTPUT ONLY"
3DFNDUG %HOO ([FHO
•
Press F2 to Enter Setup
•
Select Submenu
•
Select Integrated Peripherals
•
Press Enter
•
Tab to LPT MODE will say "Bi-directional" press +1- to change value to
"OUTPUT ONLY"
•
Press Escape Twice
•
Save Changes and Exit
3DFNDUG %HOO /HJHQG &3
•
Press F2 to Enter Setup
•
Hit Right Arrow Key to Go to Advanced
•
Hit Enter
•
Screen Shows Integrated Peripherals, Hit Enter
•
Cursor Down to LPT Mode: Output Only
•
Hit Plus Key to Go to ECP Mode
•
Hit Escape
•
Hit Escape
•
Select Save Changes and Exit
•
Hit Enter
7URXEOHVKRRWLQJ
Chapter 5