Great Plains 1520P Operator Manual - Manual (Page 87)

5/6/2010 118-732M
85 Veris Drive Operating Instructions
Varying Rates with Pre-set Function
The Great Plains Precision Population Controller allows you to pre-set three different rates, and then change rates on-
the-go by toggling from one rate to another rate with the Up or Down arrow keys. To enter the three pre-set rates, press
Function key until Pre-set Menu screen appears. See Figure 1. Use Up/Down arrow keys to toggle from manual mode
to pre-set mode.
Figure 1. Press Function key to move the next pre-set screen, and the Up/Down arrow keys to set the pre-set rates.
Figure 2. When in Pre-Set mode, the main operating screen shows the pre-set rate currently being applied. See
Figure 3. NOTE: When you are in Pre-Set mode, the Up/Down arrow keys only toggle between pre-set rates.
Figure 3. Operating screen when using Pre-Set Rates.