Great Plains 1520P Operator Manual - Manual (Page 36)

1510P and 1520P
118-732M 5/6/2010
34
Changing Seed Meter Wheels
Refer to Figure 37
Choose the correct seed meter wheel for the type
of seed you will be using. Be sure to use the same
wheel type on all meters.
To change seed meter wheels:
1. Shut off seed flow to meters by moving sliding
seed tubes. For more information see page
32.
Refer to Figure 38
2. Clean out meter. For more information see
page 33.
Refer to Figure 39
3. Push in spring-loaded knob and turn. Pull off
wheel retainer and spring.
Figure 37
Sliding seed tubes shut off
18298
Sliding seed
tubes
Figure 38
Meter clean out
19190
Clean out door
Knob and spring
Figure 39
Remove wheel retainer and spring
18294