Great Plains DVN8324 Assembly Manual - Manual (Page 40)

36 8315-8324DVN Great Plains Manufacturing, Inc.
550-466Q-ENG 11/25/2013
Completing Setup
197.If machine is equipped with an optional finishing
attachment, refer to “Parts Manual” for parts break-
down.
198.Once the options are installed, fold the machine to
check for clearance and interferences. Slowly fold
Turbo Max while watching that hoses and wiring har-
nesses do not become pinched or kinked while watch-
ing for interferences.
Note: Double check that all bolts are tightened to specs,
See “Torque Values Chart” on page 37.Consult the
operating instructions, “Operator’s Manual”, for the
first time field adjustments before going to the field.
199.The decals may now be installed.
200.See appropriate pages for decals in the “Parts Manual”
for decal placement.
201.To install new decals:
202.Clean the area on which the decal is to be placed.
203.Peel backing from decal. Press firmly on surface, being
careful not to cause air bubbles under decal.