Great Plains 3000 Operator Manual - Manual (Page 6)

4
Important Safety Information
2700 and 3000 Three-Point Drill 118-365M-A 9/9/10
Great Plains Mfg., Inc.
838-266C
Red Reflectors
One on each walkboard;
two decals total
818-003C
Slow Moving Vehicle Decal
838-265C
Amber Reflectors
Outside ends of each
walkboard
Safety Decals
Your implement comes equipped with all safety decals in place.
They were designed to help you safely operate your implement.
1. Read and follow decal directions.
2. Keep all safety decals clean and legible.
3. Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
4. When ordering new parts or components, also request cor-
responding safety decals.
5. To install new decals:
a. Clean the area on which the decal is to be placed.
b. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
17882
17894
17882