Great Plains 3000 Operator Manual - Manual (Page 28)

26
Section 6 Options
2700 and 3000 Three-Point Drill 118-365M-A 9/9/10
Great Plains Mfg., Inc.
Small Seeds Attachment
The small-seeds attachment delivers small seeds evenly
and gently. With a Y-tube, small seeds are placed through
the opener seed tube. Otherwise, seeds are placed directly
in front of the press wheel. For setting the seeding rate on
the attachment, refer to Small Seeds Attachment, “Adjust-
ments,” page 14.
To order the small seeds attachment, contact your Great
Plains dealer. Refer to the table below for the correct part
number for your drill.
Attachment Package Part Number
Drill Size Press Wheel Hose
Mount
Y-Tube Mount
27-ft., 6-in. Rows 133-042A 133-043A
27-ft., 7-in Rows 133-044A 133-045A
27-ft., 7 1/2-in. Rows 133-046A 133-047A
27-ft., 8-in. Rows 133-048A 133-049A
27-ft., 10-in. Rows 133-050A 133-052A
30-ft, 6-in Rows 133-053A 133-054A
30-ft, 7-in. Rows Not Available Not Available
30-ft., 7 1/2-in. Rows 133-055A 133-056A
30-ft., 8-in. Rows 133-057A 133-058A
30-ft., 10-in. Rows 133-059A 133-060A
Steel Depth Bands
Optional steel depth bands help to maintain even seeding
depth. When bolted around the center of the opener disks,
the bands keep the opener from running deeper than 1 1/2
inches.
Bundle Part Number
Steel Depth Band 121-705A
Shaft Monitor
The optional shaft monitor detects when the seed-cup shaft
stops turning. If the shaft stops for more than 20 seconds, an
alarm sounds and a warning light flashes.
For information on how to operate the shaft monitor, refer to
Shaft Monitor Operation, “Operating Instructions,” page 9.
To order shaft monitors, contact your Great Plains dealer.
Monitor Bundle Part Number
Vansco 2-Channel Shaft Monitor 116-120A
13178
13734