Great Plains 3000 Operator Manual - Manual (Page 25)

23
Section 5 Maintenance and Lubrication
9/9/10 2700 and 3000 Three-Point Drill 118-365M-A
Great Plains Mfg., Inc.
Drive Chains
Both ends of drill
Type of Lubrication: Chain Lube
Quantity = Coat generously
As
Required
Drive Chains
Both gauge wheels
Type of Lubrication: Chain Lube
Quantity = Coat generously
As
Required
Jackshaft Bearings
Two sets of bearings on each end of drill; four zerks total.
Type of Lubrication: Grease
Quantity = Until resistance is felt
16412
20
16409
16408
Wheel Axles
Type of Lubrication: Grease
Quantity = Full Pack
Seasonally
12116