Great Plains NTA3010 Operator Manual - Manual (Page 32)

28 NTA3010 and NTA3510 Table of Contents Index Great Plains Manufacturing, Inc.
160-219M-A Table of Contents Index 2014-03-26
Refer to Figure 30
14. Turn drill selector valve to Field position.
No-Marker Height Adjustment
If your drill is not equipped with markers, you can reduce
the vertical clearance required by removing two pairs of
marker stop fittings.
Refer to Figure 26 on page 26 and Figure 31
• Remove the Marker Stop bolts and spacers from the
wing stop lugs.
• Remove the stop collars from the fold cylinders.
Note: When folding for the first time after removing
marker stop fittings, operate slowly near fully
folded, and check for air tower clearances and
hose/cable pinching or kinking.
Save the removed fittings for possible future use. If
markers are later added, review the change in vertical
clearance required.
Figure 30
Drill Valve Set for Field
26412
Figure 31
Fold Cylinder Stop Collars
16168
4