Great Plains NTA3010 Operator Manual - Manual (Page 18)

14 NTA3010 and NTA3510 Table of Contents Index Great Plains Manufacturing, Inc.
160-219M-A Table of Contents Index 2014-03-26
Make Hydraulic Connections
High Pressure Fluid Hazard:
Only trained personnel should work on system hydraulics!
Escaping fluid under pressure can penetrate skin, causing
serious injury. Avoid the hazard by relieving pressure before
disconnecting hydraulic lines. Use a piece of paper or
cardboard, NOT BODY PARTS, to check for leaks. Wear
protective gloves and safety glasses or goggles when working
with hydraulic systems. If an accident occurs, seek immediate
medical attention from a physician familiar with this type of
injury.
Refer to Figure 8
To distinguish hoses on the same hydraulic circuit, refer
to plastic hose label. The hose under an
extended-cylinder symbol feeds a cylinder base end. The
hose under a retracted-cylinder symbol feeds a cylinder
rod end.
DO NOT connect return line to a power-beyond-port.
Figure 8
Plastic Hose Label
817-348c
17641