Great Plains 2525P Operator Manual - Manual (Page 63)

4/23/2010 118-915M
61 Maintenance and Lubrication
Meter Maintenance
Meter Slide Maintenance. For proper seeding
operation, seasonally or when changing crops,
check meter slide for wear. If you have a notice-
able increase in seeding rate you may need to
replace the meter slide.
Refer to Figure 79
1. If seed box is not empty, shut off sliding seed
tubes.
Refer to Figure 80
2. Clean out seed meter.
3. Remove wheel retainer and spring. Refer to
page 37 for more information.
Refer to Figure 81
4. Pull seed meter wheel out about 1/4 inch, or
past the wheel drive pin, and spin backward to
clean out seeds from top pockets.
5. Remove the seed meter wheel.
Figure 79
Sliding seed tubes shut off
22852
Sliding seed
tubes
Figure 80
Meter clean out
22857
Figure 81
Remove seed meter wheel
22681
Spin wheel
backward before
removing