Great Plains DICKEY-john IntelliAg Planter-Drill Control L1 - Manual (Page 21)

OPERATOR’S MANUAL
IntelliAg PDC User Level 1 (GP)
11001-1508-200903
TROUBLESHOOTING & ALARMS / 19
TROUBLESHOOTING & ALARMS
Alarms are indicated on the Virtual Terminal with the following graphic, as
well as with a continuous, audible alarm. The audible alarm is terminated by
pressing the Alarm Cancel button or ESC key. In addition, detailed
descriptions of the current alarm can be viewed by pressing the Alarm
Detail button. Some of the alarm conditions display instructions on
correcting the situation.
Alarms are presented in a full screen display that will describe the alarm
and, depending upon the alarm, may give instructions on how to fix the
alarm. Each alarm type has an associated alarm number that can be
cross-referenced in this section.
Some alarms will require a specific action before the alarm condition will
cease. In these cases, the instructions to proceed are indicated in the alarm
display.
The following table describes the possible alarm conditions, causes, and
remedies.
IntelliAG
212