Great Plains TM700 Operator Manual - Manual (Page 12)

Tractor Mount Sprayer
500-052M 5/13/2003
10
Introduction
Great Plains welcomes you to its growing family of
new product owners. This Tractor Mount Sprayer
has been designed with care and built by skilled
workers using quality materials. Proper setup,
maintenance and safe operating practices will
help you get years of satisfactory use from the
machine.
Intended Usage
Use this Tractor Mount Sprayer as part of a pres-
surized sprayer system to apply liquid pesticides,
herbicides or fertilizers to production-agriculture
crops only. Do not modify sprayer for use with at-
tachments other than those approved by Great
Plains.
Models Covered
TM500 & TM700 Tractor Mount Sprayer
Using This Manual
This manual will familiarize you with safety, as-
sembly, operation, adjustments, troubleshooting
and maintenance. Read this manual and follow
the recommendations to help ensure safe and ef-
ficient operation.
The information in this manual is current at print-
ing. Some parts may change to assure top
performance.
Definitions
The following terms are used throughout this
manual.
Right-hand and left-hand as used in this manual
are determined by facing the direction the ma-
chine will travel while in use unless otherwise
stated.
IMPORTANT: A crucial point of information re-
lated to the preceding topic. For safe and cor-
rect operation, read and follow the directions
provided before continuing.
NOTE: Useful information related to the preced-
ing topic.
Owner Assistance
If you need customer service or repair parts, con-
tact a Great Plains dealer. They have trained
personnel, repair parts and equipment specially
designed for Tractor Mount Sprayer products.
Your machine’s parts were specially designed and
should only be replaced with Tractor Mount Spray-
er parts. Always use the serial and model number
when ordering parts from your Great Plains dealer.
Record your sprayer model and serial number
here for quick reference:
Model Number:__________________________
Serial Number: ___________________________
Your Great Plains dealer wants you to be satisfied
with your new machine. If you do not understand
any part of this manual or are not satisfied with the
service received, please take the following
actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any
problems so they can assist you.
2. If you are still unsatisfied, seek out the owner
or general manager of the dealership.
3. For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060