Wheatheart Self-Propelled Auger Kit (Wheatheart R Series) - Manual (Page 14)

2. S AFETY F IRST W HEATHEART - S ELF -P ROPELLED A UGER K IT
2.10. S AFETY D ECALS W HEATHEART BH & R S ERIES
14 30761 R0
2. Decide on the exact position before you remove the backing paper.
3. Align
the decal over the specified area and carefully press the small portion
with the exposed sticky backing in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining
portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign
backing paper.
2.10.2. S
AFETY
D
ECAL
L
OCATIONS
Replicas of the safety decals that are attached to the equipment are shown in the
figure(s) that follow. Proper safety procedures require that you familiarize
yourself with the various safety decals and the areas or particular functions that
the decals apply to as well as the safety precautions that must be taken to avoid
serious injury, death, or damage.
Figure 2.3 Safety Decal Locations
Decal # 9700024
Decal # 28128
Decal # 17698