Wheatheart X13 Power Swing - Manual (Page 26)

4. M AINTENANCE & S TORAGE W HEATHEART - P OWER S WING M ANUAL
4.2. S TORAGE P ROCEDURE E LECTRIC AND H YDRAULIC
26 30802 R0
4.2. STORAGE PROCEDURE
T O PROTECT P OWER S WING IN STORAGE DURING THE OFF - SEASON :
1. Raise wheels to full up position.
2. Clean out axle assembly and lubricate chains with a light coating of oil.
3. Inspect unit for damage and note any repairs required. Order replacement
parts from your dealer.
4. Check tire pressure and inflate to 24 psi (165 kPa).
T O PREPARE FOR USE AFTER STORAGE :
5. Check tire pressure and inflate according to recommendation on side wall if
necessary.
6. Keep decals clean. Replace any decal that is damaged or not clearly visible.
7. Conduct general maintenance procedure before using auger.
Important: Use only genuine Wheatheart replacement parts or equivalent. Replacement
parts MUST meet ASABE standards or serious injuries may result. Use of
unauthorized parts will void warranty. If in doubt, contact Wheatheart or your
local Wheatheart dealer. Do not modify any components of the Power Swing.