Hydraulic drive, Ee figure 3.2), To move (figure 3.2) – Wheatheart X13 Power Swing User Manual
Page 23: Caution
W
HEATHEART
- P
OWER
S
WING
M
ANUAL
3. O
PERATION
E
LECTRIC
AND
H
YDRAULIC
3.2. H
YDRAULIC
D
RIVE
30802 R0
23
Figure 3.2 Remote Transmitter
3.2. HYDRAULIC DRIVE
1. Check in your tractor manual or with your dealer regarding the correct type of
coupler to use on your Power Swing hoses. Clean hose end and apply a
thread sealant before securing to coupler.
2. Ensure that the hydraulic lines are properly connected and secure.
3. Keep hydraulic lines away from moving parts.
4. Do not disconnect the hydraulic couplers when under pressure. Consult the
tractor manual for the correct procedure.
Important:
Because the Power Swing has a control valve independent of the tractor, the
tractor hydraulic control has to be engaged when using the Power Swing.
GREEN “ON”
BUTTON
CAUTION
Do not disconnect coupler under pressure.
Relieve pressure and then disconnect.
CAUTION
Do not start equipment until area is clear of all
untrained personnel.