Clarion SR5000 - Manual (Page 36)

37
System Status Chirps
Table of Zones
NOTE: The warning response does not report on the LED.
Security Diagnostics
The system stores the last two full triggers in memory. These are not erasable. Each time the unit
sees a full trigger, the older of the two triggers in memory will be replaced by the new trigger. To
access long term event history:
1. With the ignition off, press and HOLD the override switch.
2. Turn on the ignition.
3. Release the override switch.
Zone DESCRIPTION LCD Icon
(LED Flashes)
1 Instant trigger - hood pinswitch Hood Open and Trigger Alert Icon
2 Instant trigger - a heavier impact Full Trigger Shock Sensor Icon
detected by the shock sensor
3 Door switch trigger Door Open and Trigger Alert Icon
4 Instant trigger - for optional sensors N/A
5 Ignition trigger N/A
Action Number of Chirps Description
Arm 1 System armed
Arm 1 (3 second delay), 1 System armed with open zone notification
Disarm 2 System disarmed
Disarm 4 System disarmed with tamper Alert
Disarm 5 System disarmed false alarm prevention active