Clarion SR5000 - Manual (Page 35)

36
False Alarm Prevention Circuitry
False alarm prevention circuitry bypasses any zone that triggers the system more than three times
within a one-hour period. For a full description of this operation refer to the owner's manual.
Power-Up
Power-up ensures that the when the system is powered up it will return to the same state it was in
when power is disconnected. For a full description of power-up refer to the owner's manual.
24-Hour Timer Mode
To enter 24-hour Timer Mode, press and simultaneously. The remote control will produce
a melody and the clock indicator will appear on the remote’s LCD. Once in Timer Mode, the
system will remote start every 24 hours. Repeat this process to turn Timer Mode off.
Diagnostics
The system’s microprocessor monitors and reports all active and violated zones when arming and
disarming. LED flashes indicate the active or violated zone; siren chirps indicate system status.
Arm/Disarm Diagnostics
The number of siren chirps will indicate the status of the system when arming and disarming. For
information on which zone is active or has been violated refer to the Table of Zones.
IMPORTANT! When testing the systems sensor and trigger inputs reset false alarm
prevention circuitry by turning on the ignition after every third system trigger.