Remote sensor bypass – Clarion SR5000 User Manual
Page 34
35
4.
Release the override switch.
5.
Press and release the override switch.
The LED will now report the last system shutdown by flashing for one minute in the below grouped
patterns; the LED will stop flashing when the ignition is turned on.
Remote Sensor Bypass
Remote Sensor Bypass allows the operator to select which inputs and sensors are active during a
particular arming cycle. For a full description of Remote Sensor Bypass operation for testing
purposes refer to the owner's manual.
LED FLASHES
SHUTDOWN MODE
One
System timed out
Two
Over-rev shutdown
Three
Low or no RPM
Four
Remote Shutdown (or optional push-button)
Six
(-) Shutdown (H3/3 GRAY) or (+) Shutdown (H3/4 BROWN)
Seven
(-) Neutral safety shutdown (H3/6 BLACK/WHITE)
Eight
Wait-to-start timed out