Casio CTK6000 - Manual (Page 53)

25.5 Master Tune Parameter
These parameters configure the Master Tuning settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
Master Fine Tune 0000 R/W 00000000 10 01 0000-0200-03FF -100/512 - 0 - 100/512(cent)
Master Coarse Tune 0001 R/W 7 01 28-40-58 -24 - 0 - +24(semitone)
25.6 Master Mixer Parameter
These parameters configure the Master settings of the mixer.
Parameter ID R/W Block Size Array Min-Def-Max Description
Master Volume 0002 R/W 00000000 7 01 00-7F-7F 0 - 127
Master Pan 0003 R/W 7 01 00-40-7F -64 - 0 - +63
Master Line Select 0004 R/W 1 01 00-00-01 0...System Chorus
1...DSP
25.7 Part Parameter
Part parameters configure the settings of each musical instrument part.
Parameter ID R/W Block Size Array Min-Def-Max Description
Part Enable 0068 R/W 4-0:Part # 1 01 00-01-01 0...Off
1...On
Scaletune Enable 0069 R/W 1 01 00-01-01 0...Disable
1...Enable
Tone Num 006A R/W 14 01 0000-0000-3FFF 0 - 16383
Fine Tune 006B R/W 10 01 0000-0200-03FF -100/512 - 0 - 100/512(cent)
Coarse Tune 006C R/W 7 01 28-40-58 -24 - 0 - +24(semitone)
Volume 006D R/W 7 01 00-64-7F 0 - 127
Acmp Volume 006E R/W 7 01 00-7F-7F 0 - 127
Pan 006F R/W 7 01 00-40-7F -64 - 00 - +63
Cho Send 0070 R/W 7 01 00-00-7F 0 - 127
Rev Send 0071 R/W 7 01 00-28-7F 0 - 127
Bend Range 0072 R/W 7 01 00-02-18 0 - 24
Line Select 0073 R/W 1 01 00-00-01 0...System Chorus
1...DSP
26 Tone Parameter
These parameters configure tone settings.
26.1 Drawbar Parameter
These parameters configure drawbar organ settings (CTK-7000, WK-7500 only).
Parameter ID R/W Block Size Array Min-Def-Max Description
Position 001E R/W 3-0:Select Bar 2 01 00-00-03 0-3
Percussion 001F R/W 00000000 2 01 00-00-03 0...off
1...2nd
2...3rd
3...2nd+3rd
Percussion Decay Time 0020 R/W 7 01 00-00-7F 0-127
Click 0021 R/W 1 01 00-00-01 0...off
1...on
Type 0022 R/W 1 01 00-00-01 0...Normal
1...Vintage
53