Casio CTK6000 - Manual (Page 24)

• Drum
This setting optimizes for drum sounds. The damper pedal does not function. The Hold1, Channel
Coarse Tune, and Master Coarse Tune messages are ignored if they are received.
• Drawbar
This setting optimizes for drawbar tones. The damper pedal performs on/off operations.
13 Channel After Touch
Message Format: DnH vvH
n: MIDI Channel Number
vv: Value
Send This message is not sent by this Instrument.
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
14 Pitch Bend
Message Format: EnH llH mmH
n: MIDI Channel Number
ll: Value LSB
mm: Value MSB
Send Sent when the bender is operated.
Receive Receipt changes the pitch of the currently sounding note. The range of the pitch change
depends on the Bend Range value setting.
24