Casio CTK6000 - Manual (Page 17)

10.19 NRPN (62H,63H)
Message Format: BnH 62H llH (LSB)
BnH 63H mmH (MSB)
n: MIDI Channel Number
ll: LSB Value
mm: MSB Value
10.19.1 Part Enable
Message Format: BnH 62H 00H
BnH 63H 02H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: Value (Note1)
ll: (Send:00H, Receive:Ignored)
Note1 : For information about the relationship between setting values and send/receive values, see the “36.1 Off/On Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when each part’s Part On/Off operation is performed.
Receive Receipt changes the part on/off setting of the corresponding part.
10.19.2 DSP Enable
Message Format: BnH 62H 01H
BnH 63H 02H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: Value (Note1)
ll: (Send:00H, Receive:Ignored)
Note1 : For information about the relationship between setting values and send/receive values, see the “36.1 Off/On Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when each part’s DSP Line On/Off operation is performed.
Receive Receipt changes the DSP on/off setting of the corresponding part.
17