Casio CTK6000 - Manual (Page 23)

Send This message is not sent by this Instrument.
Receive Receipt performs the same operation as when All Notes Off is received.
11.6 Mono (7EH)
Message Format: BnH 7EH 00H
n: MIDI Channel Number
Send This message is not sent by this Instrument.
Receive Receipt performs the same operation as when All Notes Off is received.
11.7 Poly (7FH)
Message Format: BnH 7FH 00H
n: MIDI Channel Number
Send This message is not sent by this Instrument.
Receive Receipt performs the same operation as when All Notes Off is received.
12 Program Change
Message Format: CnH ppH
n: MIDI Channel Number
pp: Program Number (Note1)
Note1 : For details about the relationship between the program number and the tone, see the Tone List that comes with
the Instrument.
Send Sent when a tone is selected.
Receive Receipt changes the ton of the corresponding part. The selected tone is determined by the
program value of this message and the Bank Select message value received prior to this message. Also
note that receipt of this message also may change the Timbre Type that corresponds to the selected
tone. For more information, see “About the Timbre Type” below.
About the Timbre Type Tones that are selected by each Instrument part have an attribute that
depends on the sound source operation type. This attribute is called the “timbre type,” which is one of
the types described below.
• Melody
This timbre type optimizes for normal melody tones. The damper pedal performs on/off operations.
• Piano
This setting optimizes for piano tones. The damper pedal performs on/off operations, but the
decay speed of sounding voices changes in accordance with the Hold1 message value(CTK-7000,
WK-7500, AT-3, AT-5 only).
23