Exide Technologies GB4127 - Manual (Page 11)

10
2.1.8 Viewing Charge Information
Additional charge information is available any time by pressing the INFO button. This information is
retained after the battery is disconnected until the next battery is connected. After 20 seconds the display
returns to the default display of amps and volts per cell. The following information can be viewed:
Parameter DISPLAY DESCRIPTION
Charger State XXXXXX Message describing charger state.
Amps CHARGER DC AMPS
AA: xxxA
Charger current in amps.
Volts/Cell BATTERY V/C
VC: x.xxVC
Battery voltage in volts per cell (v/c).
Amp Hours ACCUMULATED AH
AH: xxxxAH
Amp Hours returned for the current (or last) charge cycle.
Charge Time CHARGE TIME
TC: xx:xxHM
Charge time for the current (or last) charge cycle in hours and minutes.
Percent Return % AH RETURNED
PR: xxx%
Percent of Amp Hours returned as a function of battery AH rating.
Voltage BATTERY VOLTS
VV: xx.xV
Total battery voltage in volts.
End Current CHARGE END AMPS
EA: xxxA
End current for the last charge cycle (current amps if charging)
End Voltage CHARGE END VOLTS
EV: x.xxVC
End voltage for the last charge cycle (current voltage if charging)
Software SOFTWARE VERSION
SW: x.xx
Control software version