Technical service manual, Warranty, Single channel controller – Viking Pump TSM630.4: K-QS 124E Controller User Manual
Page 10
SECTION TSM 630.4
PAGE
10 OF 10
ISSUE
D
VIKING PUMP, INC.
•
A Unit of IDEX Corporation
•
Cedar Falls, IA 50613 USA
© 3/2013 Viking Pump Inc.
All rights reserved
TECHNICAL SERVICE MANUAL
WARRANTY
Viking warrants all products manufactured by it to be
free from defects in workmanship or material for a
period of one (1) year from date of startup, provided
that in no event shall this warranty extend more than
eighteen (18) months from the date of shipment from
Viking. The warranty period for Universal Seal series
pumps ONLY (Universal Seal models listed below) is
three (3) years from date of startup, provided that in
no event shall this warranty extend more than forty-two
(42) months from the date of shipment from Viking.
UNDER NO CIRCUMSTANCES SHALL VIKING BE
LIABLE UNDER THIS WARRANTY OR OTHERWISE
FOR SPECIAL, INCIDENTAL, INDIRECT,
CONSEQUENTIAL OR PUNITIVE DAMAGES OF ANY
KIND, INCLUDING, BUT NOT LIMITED TO, LOST
OR UNREALIZED SALES, REVENUES, PROFITS,
INCOME, COST SAVINGS OR BUSINESS, LOST OR
UNREALIZED CONTRACTS, LOSS OF GOODWILL,
DAMAGE TO REPUTATION, LOSS OF PROPERTY,
LOSS OF INFORMATION OR DATA, LOSS OF
PRODUCTION, DOWNTIME, OR INCREASED
COSTS, IN CONNECTION WITH ANY PRODUCT,
EVEN IF VIKING HAS BEEN ADVISED OR PLACED
ON NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES AND NOTWITHSTANDING THE FAILURE
OF ANY ESSENTIAL PURPOSE OF ANY PRODUCT.
THIS WARRANTY IS AND SHALL BE VIKING’S SOLE
AND EXCLUSIVE WARRANTY AND SHALL BE IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, ALL WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT ALL OF WHICH OTHER
WARRANTIES ARE EXPRESSLY EXCLUDED.
See complete warranty at www.vikingpump.com.
SINGLE CHANNEL CONTROLLER
EU (EUROPEAN UNION)
SPECIFICATIONS
DISMANTLING AND DISPOSAL
The controller meets the essential requirements of the
following European Union Directives by using the relevant
standards shown below to indicate compliance
The enclosure is made of Polycarbonate material.
Use proper recycling techniques.
Do not throw in trash. When disposing, the parts must be
handled and recycled in accordance with local regulations.
Per 2002/96/EC W.E.E.E. Directive, please recycle properly.
The controller contains a lithium battery that must be
recycled properly
2004/108/EC Electromagnetic Compatibility
Directive
EN 61326-1
2006
Electrical equipment for
measurement, control
and laboratory use- EMC
requirements (Industrial
Immunity, Class b
Emissions).
EN 61000-4-2
1996 +A1,A2
Electrostatic Discharge
Immunity
EN 61000-4-3
2006
Radiated Field Immunity
10V/M 80-1000 MHz, 3 V/M
1.4-2.7 GHz
EN 61000-4-4
2004
Electrical Fast-Transient/
Burst Immunity
EN 61000-4-5
2006
Surge Immunity
EN 61000-4-6
1996 +A1,A2,A3 Conducted Immunity
EN 61000-4-11 2004
Voltage Dips, Short
Interruptions and Voltage
Variations Immunity
EN 61000-3-2
2006
Harmonic Current Emissions
EN 61000-3-3
2005
Voltage Fluctuations and
Flicker
SEMI F47
2000
Specification for
Semiconductor Sag
Immunity Figure R1-1
2006/95/EC Low-Voltage Directive
EN 61010-1
2001
Safety Requirements of
electrical equipment for
measurement, control and
laboratory use. Part 1:
General requirements.
Compliant with 2002/95/EC RoHS Directive