Viking Pump TSM610: Offset Gear Reducers - Manual

SECTION TSM
PAGE
ISSUE
CONTENTS
Introduction .........................................................................1
Special Information .............................................................2
Lubrication ..........................................................................2
Installation ..........................................................................3
Operation ............................................................................3
Disassembly .......................................................................3
Assembly
“A” Reducer ......................................................................4
“B” Reducer ......................................................................5
“C” Reducer ......................................................................6
Technical Data ....................................................................7
Warranty .............................................................................8
INTRODUCTION
The illustrations used in this manual are for identification
purposes only and cannot be used for ordering parts. Obtain
a parts list from the factory or a Viking® representative.
Always give the complete name of the repair part and part
number along with the reducer part number when ordering
repair parts. The reducer part number is stamped on the
nameplate.
UNMOUNTED PUMP AND UNIT MODEL NUMBERS
FIGURE 1
“A” SIzE hELICAL GEAR REDUCER
610
1
F
“A”, “B” AND “C” SIzE REDUCERS
SIzE PART NUMBER RATIO
A
3-551-049-224 2.24:1
3-551-050-276 2.76:1
3-551-051-343 3.43:1
3-551-052-417 4.17:1
B
3-551-054-187 1.87:1
3-551-055-224 2.24:1
3-551-001-276 2.76:1
3-551-002-340 3.40:1
3-551-003-419 4.19:1
3-551-004-506 5.06:1
3-551-005-627 6.27:1
3-551-007-765 7.65:1
C
3-551-056-221 2.21:1
3-551-032-280 2.80:1
3-551-008-331 3.31:1
3-551-009-421 4.21:1
3-551-010-508 5.08:1
3-551-011-624 6.24:1
3-551-012-795 7.95:1
FIGURE 2
“B” SIzE hELICAL GEAR REDUCER
FIGURE 3
“C” SIzE hELICAL GEAR REDUCER
Electronic copies of the most current TSM issue can be found on the Viking Pump website at www.vikingpump.com
VIKING PUMP, INC. • A Unit of IDEX Corporation •
Cedar Falls, IA 50613 USA VIKING PUMP, INC. • A Unit of IDEX Corporation •
Cedar Falls, IA 50613 USA
TECHNICAL SERVICE MANUAL
VIkING® hELICAL GEAR REDUCERS
“A”, “B”, AND “C” SIzES