Tweco 2RT Transmig - Manual (Page 16)

TRANSMIG 2RT INTRODUCTION
INTRODUCTION 2-4 Manual 0-5196
2.09 Specifications
Description Transmig 2RT Wirefeeder
Wirefeeder Plant Part Number W3000500
Wirefeeder Plant Dimensions H 453mm x W 238mm x D 553mm
Wirefeeder Plant Mass 25kg
Wire Feed Motor Voltage 24 VDC
Gas Solenoid Voltage 24 VDC
MIG (GMAW) Welding Output,
40°C, 10 min
30% @ 350A
60% @ 250A
100% @ 205A
Minimum Wire Speed 1.2 MPM
Maximum Wire Speed 17.8 MPM
Operating Temperature Range 0°C - 40°C
Interconnection Plug 10 Pin
Interconnection Length 8 metre
Table 2-1: Transmig 2RT Specification
NOTE
Due to variations that can occur in manufactured products, claimed performance, voltages, ratings, all
capacities, measurements, dimensions and weights quoted are approximate only. Achievable capacities and
ratings in use and operation will depend upon correct installation, use, applications, maintenance and service.