Tweco 100 Weldskill - Manual (Page 16)

weldskill 100 iNVeRTeR
2-4 March 3, 2008
2.10 Specifications
Description WeldSkill 100
Power Source Part Number W1003100
Cooling Fan Cooled
Welder Type Inverter Power Source
Welding Power Source Mass 4.2kg
Dimensions H 240mm x W 115mm x D 270mm
Manufactured to Australian
Standard
AS 60974.1-2006
Number of Phases Single Phase
Nominal Supply Voltage 240V ±15%
Nominal Supply Frequency 50Hz
Welding Current Range 5 - 100 Amps
Factory Fitted Supply Plug Rating 10 Amps
Effective Input Current (I1eff) 9 Amps
Maximum Input Current (I1 max) 20 Amps
Single Phase Generator
Requirement
5 KVA
Welding Output, 40°C ,10 min.
(quoted figures refer to MMAW
output)
100A @ 20%, 24V
57A @ 60%, 22.3V
45A @ 100%, 21.8V
Protection Class IP23S
NOTE
Due to variations that can occur in manufactured products, claimed performance, voltages, ratings,
all capacities, measurements, dimensions and weights quoted are approximate only. Achievable
capacities and ratings in use and operation will depend upon correct installation, use, applications,
maintenance and service.
2.11 Options and Accessories
Description Part Number
TIG Torch Weldskill 100/130 Inverter W7003006
TIG torch Accessory Kit BGSAK2
Flow Meter/Regulator 210254