Tweco 300 TS Arcmaster(Feb2006) - Manual (Page 31)

25
4.05 Power Source Features
Feature Description
New Digital Control
• Almost all welding parameters are adjustable.
Touch Panel Switches • Touch switches eliminate mechanical damage.
Front Control Cover
• Protects front panel controls.
Digital Meter
• Displays selected weld parameter value.
• Displays weld current when welding.
• Displays weld current for 20 seconds after weld has
been completed.
• A selected weld parameter value can be adjusted at any
time even while welding.
Intelligent Fan Control • The intelligent cooling system is designed to reduce dust
and foreign material build-up, whilst providing optimum
cooling.
• Fan speed reduces approximately 30 seconds after
machine is turned ON.
• Fan speed increases when internal components reaches
operating temperature.
ON/OFF Switch • Primary voltage Supply ON/OFF switch located on
rear panel.
Save/Load Function
• A total number of 5 programs can be saved into the
300 TS memory.
SAVE the Current Weld Parameters into Memory
• Press and HOLD the
SAVE button. Beep will sound and
Digital Meter will show a number 1.
• Select a memory location by rotating the control knob,
1 to 5 is displayed on the meter.
• After selecting the desired memory location (i.e. 1 to 5),
press the right scroll button and the machine will give a
beep to confirm the weld parameters from the control
panel are saved.
LOAD (retrieve) a Program to Control Panel
• Press and HOLD the LOAD button. Beep will sound and
Digital Meter will show a number 1.
• Select a memory location by rotating the control knob,
1 to 5 is displayed on the meter.
After selecting the desired memory location (i.e. 1 to 5),
press the right scroll button and the machine will
give a
beep to confirm the weld parameters are loaded onto the
control panel.