Tweco 300 MST Arcmaster - Manual (Page 35)

29
4.04 Save-Load Operation
A total number of 5 programs can be saved into the 300 MST memory.
SAVE the Current Weld Parameters into Memory
• Press and HOLD the
SAVE button. Beep will sound and digital display will show a number 1.
• Select a memory location by rotating the control knob, 1 to 5 is displayed on the meter.
• After selecting the desired memory location (i.e. 1 to 5), press the parameter button and the machine.
will beep to confirm the weld parameters from the control panel are saved.
LOAD (retrieve) a Program to Control Panel
• Press and HOLD the LOAD button. Beep will sound and digital display will show a number 1.
• Select a memory location by rotating the control knob, 1 to 5 is displayed on the meter.
• After selecting the desired memory location (i.e. 1 to 5), press the parameter button and the machine
will beep to confirm the weld parameters are loaded onto the control panel.