Tweco PakMaster 75XL Plus (CE) - Manual (Page 43)

Manual 0-2782 A-1 APPENDIX
APPENDIX 1: INPUT WIRING REQUIREMENTS
NOTES
The table above is based on the following output current and voltage: 130VDC @ 60A
Refer to Local and National Codes or local authority having jurisdiction for proper wiring requirements.
Cable size is de-rated based on the Duty Cycle of the equipment.
The suggested sizes are based on flexible power cable with power plug installations. For hard-wired installations
refer to local or national codes.
Cable conductor temperature used is 167° F (75° C).
An energy limiting fuse UL Class RK-1 (examples: BUSS LPS/LPN-RK or Gould-Shawmut AZK-A6K) should be
used to minimize damage to Plasma Cutting, Welding or power distribution equipment.
NEVER use replaceable element fuses like UL Class H, or "one-time" fuses like UL Class K5.
Current Input Suggested Sizes
Voltage Freq. 3-Ph 3-Ph Fuse (Amps) Wire (mm 2 )
(Volts) (Hz) (kVA) (Amps) 3-Ph 3-Ph
380 50/60 12.4 18.9 25 6
415 50/60 12.6 17.5 25 4
Line Voltages with Recommended Circuit Protection and Wire Sizes
Input Power Input