Tweco 81 with SL100SV - Manual (Page 102)

SERVICE 5-38 Manual 0-4641
5
8. Install replacement components as follows:
For Input Diodes:
Diode
Assembly
Art # A-03950
Thermal Pad
Slot
Input Diode Replacement
a. Apply the thermal pad to the flat surface of the diode. Align the pad with the rectangular flat surface on the back of
the device.
b. Align the diode horizontally, with its longer edges perpendicular to the power supply base.
c. Secure the device and rectangular pad to the chassis with the replacement screws and washers.
9. Torque screw(s) to 35 in-lb / 3.95 Nm.
NOTE
Failure to torque properly will cause component damage.
10. Connect wires per the chart.
Input Diode To Main PCB Input Diode To Main PCB
E5 E1 E5 E1
E13 E2
E18 E3
E6, E8 E7 E6, E8 E7
E14, E16 E15 E14, E16 E15
400V, 415V, 460V, 600V Units 208/230V Units
CutMaster 81 Input Diode Connections
E13, E18 E2