Teradek Beam - Manual (Page 28)

© 2 0 1 4 . T e r a d e k , L L C P a g e | 2 6
Decoder ID 1
WiFi SSID and Channel TeradekBeam_00, channel 36
WiFi password xyjTeradekBeam_00
IP address (WiFi) 192.168.2.1 (TX), 192.168.2.2 (RX)
IP address (LAN) 192.168.0.161 (TX), 192.168.0.162 (RX)
3.5 Supported Video Formats
The following resolutions and frame rates are supported by Beam.
720 x 480 i59.94 (NTSC) 1920 x 1080 P24/23.98
720 x 576 i50 (PAL) 1920 x 1080 PsF24/PsF23.98
1280 x 720 P60/59.94 1920 x 1080 P25
1280 x 720 P50 1920 x 1080 P30/29.97
1280 x 720 P30/29.97 1920 x 1080 PsF30/PsF29.97
1280 x 720 P25 1920 x 1080 P50
1280 x 720 P24/23.98 1920 x 1080 P60/59.94
1920 x 1080 i50 1920 x 1080 PsF60/PsF59.94
1920 x 1080 i60/59.94
3.6 Power Input Description
Lemo Connector / Pin-Out: Beam uses a OB 302 series LEMO connector (FGG.0B.302.CLADxx)
Pin Description
1 (Closest to the red dot) GND
2 +DC
Custom / 3
rd
Party Cables

Test the power cable polarity with ONLY the power cable connected to Beam. Do not connect video cables.

Check the power cable for shorts and proper grounding.
CAUTION: Using a reverse polarity or improperly-constructed power cable can damage the product and is not covered under
warranty.