Teradek Beam User Manual
Page 22
© 2 0 1 4 . T e r a d e k , L L C
P a g e | 2 0
Serial Port Configuration
Item
Description
Baud Rate
Sets the serial port baud rate. This should match the transmitter’s baud rate and the
equipment you wish to connect.
Stop Bit
Sets the stop bit – 1 or 2.
Character Size
Character size can be set from 5 bits (CS5) to 8 bits (CS8).
Parity
Set to Odd, Even, or Disable.
Flow Control
Flow Control is disabled.