Teradek Beam User Manual
Page 17
© 2 0 1 4 . T e r a d e k , L L C
P a g e | 1 5
Serial Port configuration
Item
Description
Baud Rate
Sets the serial port baud rate. This should match the receiver’s baud rate and
the equipment you wish to connect.
Stop Bit
Sets the stop bit – 1 or 2.
Character Size
Character size can be set from 5 bits (CS5) to 8 bits (CS8).
Parity
Set to Odd, Even, or Disable.
Flow Control
Flow Control is disabled.