Teradek Beam User Manual

Page 16

P a g e | 1 4

channel audio, and 768kbps for stereo audio.

Audio Intercomm

Select On to allow for two-way stereo talkback communication.

Network Configuration

Item

Description

Ethernet IP

Displays the current IP address and allows users to set a new value.

Note that if the IP address is changed, you will need to reload the web

UI using the new address.

Ethernet NetMask

Displays the current subnet mask and allows users to set a new value.

Ethernet MAC

Displays the device’s MAC address.

Ethernet Gateway

Displays the Ethernet gateway IP address and allows users to set a new

value.

WiFi Channel

Displays the current WiFi channel. This value can be changed from

Beam’s front panel.

WiFi SSID

Displays the current WiFi SSID. This value can be changed from Beam’s

front panel.

WiFi Status

Indicates whether or not the WiFi is enabled.