Teradek Beam - Manual (Page 13)

© 2 0 1 4 . T e r a d e k , L L C P a g e | 1 1
2.2 Web-based Operation
All Beam TX and RX parameters (except the WiFi/LAN mode) can be configured via Beam’s web interface. The interface can be
accessed by connecting to the same network as Beam and opening the device’s IP address in a web browser. The current IP address
can be seen on Beam’s front panel display.
Beam TX
System Information
Item Description
Product Name Displays the product name.
Product Version Firmware version number.
Input Video Displays the video input resolution if a video signal is present.
Encoding Indicates whether or not the Encoder is running.
Streaming Displays the current encapsulation (RTP/TS2UDP), encoder mode (P2P or
Multicast), and whether or not the RTSP server is enabled.
Encoder Bitrate Current Encoder Bitrate.
Streaming Interface Current streaming interface: WiFi or Ethernet LAN.
Wi-Fi SSID/Channel Disaplys the current WiFi SSID and channel (frequency): 36(5180MHz),
44(5220MHz), 149(5745MHz), or 157(5785MHz).
Receiver Displays whether or not a Beam RX is connected.