tekmar 557 Thermostat User Manuals - Manual (Page 11)

© 2012 557_U - 08/12
11 of 12 A Watts Water Technologies Company
Monitor Menu
The monitor menu allows you to view the following temperatures and running hours:
Outdoor temperature highs and lows
Room temperature highs and lows
Floor temperature highs and lows (requires floor sensor to be installed)
Filter Hours = Number of hours since the air filter was last replaced
Heat Y1 = Number of hours the heat pump is heating
Heat Y2 = Number of hours the second stage heat pump is heating
Heat W1 = Number of hours the radiant floor (first stage heat) is on
Heat W2 = Number of hours the backup heat is on
Cool Y1 = Number of hours the heat pump is cooling
Cool Y2 = Number of hours the second stage heat pump is cooling
Cool W1 = Number of hours the radiant floor is actively cooling the room (available
in select radiant floor cooling installations)
Cool W2 = Number of hours the chilled water fan coil or chilled beam is cooling
Fan = Number of hours the fan has been operating
Humidify = Number of hours the humidifier is on
Dehumidify = Number of hours the dehumidifier is on
To clear the temperature highs and lows or the running hours:
1. Touch the temperature or running hours.
2. Display will show “ ”.
3. Touch Enter.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Toolbox Menu
This menu is provides advanced level information.
Access
Change the access level on the thermostat.
Status Info
Displays the current status of the thermostat including any overrides from the tekmarNet
®
system control. Toggles between “Status Info” and the current status.
System Normal = Thermostat is operating normally.
For all other thermostat status messages, please see the Installation & Operation
Manual 557_D.
Software Version and Type Number
Display the software “SW” and the “TYPE” number.
•
•