tekmar 509 Thermostat User Manuals - Manual (Page 2)

© 2012 U 508 - 04/12 2 of 4
VIEWING THE CURRENT TEMPERATURE
The View menu allows you to view the current temperature(s) being sensed by the thermostat
and its auxiliary sensor. To view the various temperatures, begin by selecting the View menu
using the
Menu button. Next use the Item button to view the available temperatures.
Room: This is the current air temperature of the room that is being controlled. At least
one air sensor must be active for this temperature to be displayed.
Outdoor: This is the current outdoor air temperature. This item is only available if the
auxiliary sensor has been set to sense the outdoor air temperature.
Slab: This is the current slab temperature. This item is only available if the auxiliary
sensor has been set to sense the slab temperature.
SETTING THE TEMPERATURE(S)
Use the following procedure to set the desired air and/or slab temperatures.
NOTE: Slab temperatures are only available when a slab sensor is used.
Step One: Press and release the Menu button until the Adjust Menu is reached.
Step Two: Press and release the Item button until the desired item is displayed.
Step Three: Use the or button to set the desired temperature.
Display Symbols
Warning
Displays when an error exists.
Access Level
Displays when in the user
access level.
Heat One
Displays when the heat contact
is on.