tekmar 315 tN4 Wiring Center Installation - Manual

1 of 12 © 2011 D 315 - 04/11
tN4 Wiring Center 315
D 315
04/11
Zoning Replaces: 04/09
Installation & Operation Manual
Benefi ts
Simple, convenient wiring location
Compact enclosure for flexible installation
Reduce equipment cycling when combined with
tekmarNet
® 4 Thermostats
•
•
•
The tekmarNet ® 4 (tN4) Wiring Center 315 is designed to
operate up to six zone valves in a hydronic heating system.
It can be mounted near a remote zone manifold, providing a
convenient location to wire both thermostats and zone valves
while only requiring two wires to be run back to the mechanical
room. When combined with tekmarNet
® 4 Thermostats, all
devices communicate to provide a synchronized end switch
that reduces cycling of equipment. A zone group pump
relay is also available to switch a pump.
Features
Six 24 V (ac) powered zone outputs
For use with tekmarNet
® 4 Thermostats
tN4 expansion terminals
Isolated end switch
Zone group pump relay
External diagnostic LEDs
CSA C US Certified for use in USA and Canada
•
•
•
•
•
•
•
Introduction
Power Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
End Switch/ Zone Group Pump
tN4 Wiring Center 315
Six Zone Valves
Note
Not for use with tekmarNet ® 2 Thermostats •