SoundOff Signal Directional Arrow Switch - Manual (Page 6)

DIRECTIONAL ARROW SWITCH PAGE 5
Directional Arrow
Switch Wire Color Function Predator Warning
Bar Wire Color
Function
Blue Left Arrow
Direction
Blue Left arrow Direction
Brown Center Arrow
Direction
Brown Center arrow
Direction
Green Right Arrow
Direction
Green Right Arrow
Direction
Relays Pins Connected to Wire Color
87 Predator Warning
Bar
Red
85 Ground Ground
86 Power Directional Arrow
Switch
Red / Black
30 power +12 V
INSTRUCTIONS FOR CONNECTION WITH PREDATOR
WARNING BAR: EPRD4MD0(x), EPRD6MD0(x), EPRD8MD0(x)
BLACK
GROUND
GREEN BROWN BLUE
GREEN BROWN BLUE
GROUND
86
85
87
87A
30
+12Vdc
RED W/ BLACK
RELAY
DIRECTIONAL ARROW SWITCH PAGE 10
Product Configuration Mode:
By holding down the Left and Warning Buttons together for 2 seconds, product configuration mode can
be entered. The unit will make a long “beep”, and all of the buttons will turn green when product
configuration mode has been entered.
Changing the level of brightness on the red LEDs:
The level of brightness can be changed (high, low, and off ) by pressing the Left button in product
configuration mode.
Changing level of sound:
The volume of the speaker can be changed (high, low, and off ) by pressing the Right button in product
configuration mode.
Changing between Center output options:
Which wires the Center button applies power to can be changed in the product configuration mode by
pressing the Center Button.
When the Yellow LED in the middle is lit, the unit will apply power to the Brown Wire
When the second and fourth LED’s are lit, the unit will apply power to the Blue and Green wires.
+10-30Vdc
+10-30Vdc
GROUND
BLACK
WHITE/RED
RED