SONIQ PB100 - Manual (Page 20)

20
Note:
• The displayable picture size is determined by the DVD disc. Therefore the playback picture of
some discs may not conform to the picture size you select.
• When you play discs recorded in the 4:3 aspect ratio, the playback picture will always appear in
the 4:3 aspect ratio regardless of the TV TYPE setting.
View Mode
Fill and Pillarbox are available for your choice.
Note: Depending on the disc, you may not be able to view the mode as selected.
HDMI Resolution
To select the HDMI resolution to match the capabilities of your TV.
Note: HDMI resolution can be only selected if the HDMI cable is connected to a TV.
Rating Setup
1. In STOP mode, press the SETUP button. Press the
button to select Rating.
2. Use the button to move the highlight bar to the
right, use the or button to select Use password,
Rating Level and New Password , press the OK
button to select.
3. Use the or button to select your settings, then
press the OK button to confirm.
4. Press the button to go back to the previous menu.
Repeat steps 2 and 3 to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press the EXIT or SETUP button.
Rating Level
DVDs are rated according to their content and some are equipped with a password function. The
contents allowed by rating level and the way a DVD is controlled may vary from disc to disc. For
example, if the disc allows, you could lock out violent scenes unsuitable for children or you could
lock out playback of the disc altogether.
You cannot play password function equipped DVDs rated higher than the level you selected unless
you cancel the rating level function.
The rating level are equipped to the following ratings.
1: (Kids) 2: (G) 3: (PG) 4: (PG-13)
5: (PG-R) 6: (R) 7: (NC-17) 8: (Adults)
New Password
If you forget the password, you can erase your current password by pressing the number button 8
on the remote four times, the press the OK button to confirm the setting (PASSWORD: 8888).