SONIQ PB100 - Manual (Page 19)

19
Video Setup
1. In STOP mode, press the SETUP button. Press the
button to select Video.
2. Use the button to move the highlight bar to the
right, press the or button to select TV Shape,
View Mode and HDMI Resolution, press the OK
button to select.
3. Use the or button to select your settings, then
press the OK button to confirm.
4. Press the button to go back to the previous menu. Repeat steps 2 and 3 to adjust other
options.
5. To exit the SETUP MENU and return to the normal screen, press the EXIT or SETUP button.
TV Shape
Depending on the format of the Blu-ray Disc or DVD, you can choose the picture format (aspect
ratio) best suited to the format of your TV screen:
4:3
• When wide-screen video is played, this mode clips the right and left sides of the image so that it
can be viewed on a conventional screen.
• Some wide-screen discs that do not permit Pan Scan mode playback are automatically played in
letterbox mode.
• When wide-screen video is played in this mode on a conventional Analog TV, black bands
appear at the top and bottom of the screen.
16:9
• This is the correct mode for playing wide-screen videos on on a wide-screen TV (most modern
Digital TV’s).
Language Setup
1. In STOP mode, press the SETUP button. Language
is highlighted.
2. Use the button to move the highlight bar to the
right, press the or button to select Player Menu,
Subtitles, Audio and Disc Menu, press the OK button
to select.
3. Use the or button to select your preferred
language, then press the OK button to confirm.
4. Press the button to go back to the previous menu.
Repeat steps 2 and 3 to adjust other options.
5. To exit the SETUP MENU and return to the normal screen, press the EXIT or SETUP button.
Note:
• Some discs may not play in the audio language selected. A prior language may be programmed
on the disc.
• Some discs may be set to display subtitles in a language other than the one selected. A prior
subtitle language may be programmed on the disc.
• Some discs allow you to change subtitle selections via the disc menu only. If this is the case,
press the MENU button and choose the appropriate subtitle from the selection on the disc
menu.
• Some discs may not included your pre-selected language. In this case, the player automatically
displays disc menus consistent with the disc’s initial language setting.
CUSTOMIZING THE FUNCTION SETTINGS