Soleus GPS Cross Country (SG005) - Manual - Manual (Page 9)

GPS Cross Country
6.1.4. How to view your current data before saving while the chronograph is stopped.
• Following are the information as you press S5:
Notes:
o Before going for an exercise, it is highly recommended that you set your user profile
first so that the calories will be calculated properly. Go to SET mode/USER.
o When the Chronograph is stopped and reset in RUN mode, if no activity for 10
minutes, it will return to TIME mode and the GPS will be on Standby mode (GPS
ring icon flashing)
o While in RUN mode, then the GPS signal suddenly becomes weak lost for any
reason, the Watch will display LOST GPS signal until it receives GPS signal again.
o Maximum of 15 hours of track record / 30 data files/ 100 laps for each data file can
be saved in memory.
6.2) Using Chronograph mode:
RUN mode & CHRONO mode has the same chronograph counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in CHRONO mode.
6.2.1. How to enter CHRONO mode
• When GPS is not yet received when you enter CHRONO mode, the watch will display
“SEARCH” GPS. It will be later replaced with “GPS GO” when GPS signal is already
received.