Soleus GPS Cross Country (SG005) - Manual - Manual (Page 7)

GPS Cross Country
4.4.2) Press S7 to enter RUN, CHRONO, ALTI, COMPASS, or TIMER mode. Select
INDOOR and press S5 to confirm.
4.4.3) When the chronograph is stopped or reset in any mode, it will go to TIME mode
after 10 minutes and the GPS will be on Standby mode (GPS ring icon flashing).
The GPS will auto turn OFF after 1 hour (GPS ring icon is OFF).
GPS signals and its meaning:
You will hear a beep sound when the Watch has received a GPS signal or when the GPS
signal has been lost. LOST GPS signal will also be displayed in the screen.
Step 6) Go for a RUN:
6.1) Using RUN mode:
6.1.1. How to enter RUN mode
• Press S1 or press & hold S1 or press S7 from Time mode to go to RUN mode.
The watch will prompt you to GPS GO (if Satellite signal already received) or INDOOR
(if no signal received).
• When GPS is not yet received when you enter RUN mode, the watch will display
“SEARCH GPS”. It will be later replaced with “GPS GO” when GPS signal is already
received.