Soleus GPS Cross Country (SG005) - Manual User Manual
Page 12
GPS Cross Country
6.3.4. Press S5 while the chronograph is stopped to view your current data before
saving. Following are the information as you press S5:
6.5) Using Altimeter mode:
RUN mode & Altimeter mode has the same chronograph counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in Altimeter mode. The Altimeter
function is GPS based so you need to select GPS when you enter this mode.
6.5.1. How to enter ALTI mode.
• Press S7 to go to Altimeter mode.
The watch will prompt you to GPS GO (if Satellite signal already received) or INDOOR
(if no signal received).
•
When GPS is not yet received when you enter Altimeter mode, the watch will display
“SEARCH”. It will be later replaced with “GPS GO” when GPS signal is already
received.