Soleus GPS Cross Country (SG005) - Manual - Manual (Page 16)

GPS Cross Country
General Operations
The Watch has the following main modes: Time, Run, Chronograph, Timer, Altimeter,
Compass, Data, Alarm and Set modes. Press S7 to scroll through these modes. Press S1
from Time mode will also go to RUN mode.
EL backlight:
This Watch has a Night mode function. Following are the options in SET mode and their
functions:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON – Default Start Time / END Time for NIGHT ON setting is 5 PM to 7 AM. Following
are the characteristics of NIGHT ON setting:
o Start Time and END TIME for NIGHT ON setting can be changed in SET
mode/ NIGHT.
o When the Night setting is ON, pressing any button within the Start Time / End
Time will turn ON the EL for 10 seconds.
o Outside the Start time / End Time, only press S11 will turn ON the EL for 10
seconds.
o When the chronograph is running within the Start Time/ End Time, the EL will
be always ON. It will turn OFF 10 seconds after the chronograph is stopped.
TIME mode
• How to enter TIME mode:
While in Time mode, press and hold S5 to change the view from Time 1 to Time 2 and
vice versa. And press S5 to momentarily display (3 seconds) from Time 1 to Time 2 and
vice versa.
Travelling between different Time zones
• When you are traveling to a different Time zone, you have to set your GPS Watch to
your destination Time zone. We recommend setting Time 1 to your current location and
Time 2 set to your destination Time zone.
• When you arrive to your destination Time zone, press & hold S1 for 2-3 seconds to
change the time to Time 2.
• When you go back to your original location (Time 1), press & hold S1 for 2-3 seconds to
change the time back to Time 1.
• The Time of the Watch will be synchronized with GPS TIME when you turn ON the GPS.
• Make sure that the Watch is set to the correct CITY CODE and DST ON or OFF setting
so that it can display the correct time.