6unpacking, Revel i20/i30 in-wall owner’s manual – Revel I30 User Manual
Page 6

6
Unpacking
(continued)
To unpack the I20/I30:
1. Place the packing carton in the upright
position and fully open the top flaps as
shown in step 1 of Figure 1 (above).
2. Without allowing the top flaps to close,
move the outer packing carton into an
inverted position as shown in step 2 of
Figure 1 (above).
3. Lift the packing carton off of the
loudspeaker as shown in Step 3 of
Figure 1 (above). Use caution to
avoid damaging the loudspeaker or
frame clamps. At this point, the
loudspeaker will be upside-down.
4. Remove the bottom pad. Then, remove
the Frame Alignment Tool and grille
from the grille filler. These items are
identified in Figure 2 (right).
5. Set aside the wall template, paint mask,
fiberglass insulation, spacer shim,
replacement scrim cloth and allen keys.
6. Invert speaker so it is in the upright
position.
7. When the I20/I30 is in the upright posi-
tion, remove the top pad.
8. Leave the loudspeaker upright in the
bottom pad until ready to install.
REVEL I20/I30 In-wall
Owner’s Manual
2
1
3
Figure 1: Unpacking the I20/I30
Top Pad
Bottom Pad
Frame
Alignment Tool
Paint Mask
Protective
Cloth
Grille
Allen Keys/Spacer Shim
Fiberglass
Insulation
Wall Template
Replacement
Scrim Cloth
Figure 2: Packing Materials