Revel I30 - Manual (Page 14)

14
3a. (Optional)
It is recommended that the frame be
painted before it is mounted. For
instructions on painting the frame and
grille, refer to page 19.
4. The mounting frame has spring-loaded
clamps around its perimeter, which are
designed to fold shut as the mounting
frame is placed into the wall opening
and spring open once inside, anchor-
ing the mounting frame in the wall
opening. See Figure 13 (next column)
and Figure 14 (next column). Loosen
all clamp screws until the clamps are
fully extended.
5. Snap the mounting frame into the
cutout.
6. Be sure to run the speaker wire in
through the rear opening.
REVEL I20/I30 In-wall
Owner’s Manual
Note how the clamp
springs open
CLAMP
A
Clamp
Screw
B
C
Insert
frame into wall
opening
Wall
Figure 13: Clamp Closeup
Figure 14: Clamp Mechanism
Continued on next page
Baffle
Mounting Frame
Figure 12: Remove Baffle from Mounting Frame
Installation Instructions
(continued)