Reloop DIGITAL JOCKEY 2 IE - Manual (Page 13)

ENGLISH
13
- When starting operation, the faders and volume controls of your amplifier must be set to minimum
level. Bring the loudspeaker switches into the “OFF” position. Wait between 8 to 10 seconds before
increasing the volume to avoid shot noise created by transient effect, which could cause damage
to loudspeakers and the diplexer.
- Devices supplied by voltage should not be left in the hands of children. Please exercise particular
care when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the orga-
nization of professional associations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device must be
monitored with responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or problems.
appLICatION IN aCCOrDaNCE WItH rEGuLatIONS
- This device is a professional DJ MIDI controller with integrated 4 channel soundcard that can con-
trol software. The device should be connected via USB cable to a computer.
- This product is authorised for connection to 100-240V, 50/60Hz, switching power and is designed
exclusively for indoor application.
- If the device is used for any other purposes than those described in the operation manual, damage
can be caused to the product, leading to exclusion of warranty rights. Moreover, any other appli-
cation that does not comply with the specified purpose harbours risks such as short circuit, fire,
electrical shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the warranty
rights.
MaINtENaNCE
- Check the technical safety of the device regularly for damage to the mains cord or the casing, as
well as for wearout of wear parts such as rotary knobs and sliding faders.
- If it is to be assumed that a safe operation is no longer feasible then the device must be disconnec-
ted and secured against accidental use. Always disconnect the mains plug from the outlet!
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects,
if the device no longer functions, following longer storage under unfavourable conditions or after
major transport stress.
IM_Digital_Jockey_2_Interface_Edition_US_GB.indd 13 10.12.2010 11:09:17